All In Ascent · Design system · v2

Grit
& holds.

Everything in the game is made of what an indoor gym is made of: sand-in-paint plywood with a T-nut grid, polyurethane holds in a colour circuit, route-setter's tape, chalk on everything. v2 turns those materials into tokens, components, a printed-card anatomy and an illustration system — all shared by the game, the deck and this page.

01 · Principles

Built from the gym.

Material, not decoration

Every surface maps to something in a climbing gym: the wall is plywood with a hex-offset T-nut grid and panel seams; panels and cards are chalky card stock; labels are route-setter's tape; buttons are hand-shaped holds.

Colour means grade

Like a real gym circuit, a hold's colour tells you its difficulty. Colour is always paired with text (the grade) — it is a second signal, never the only one.

A deck you could print

Every card is a poker-size layout (63.5 × 88.9 mm, 5 : 7) that scales with its own width and prints true-size from the deck page.

Tells you why

A card you can't play says why — "Needs 46 END · you have 30", "Belayer 1 is taken" — instead of just fading out.

02 · Colour

The hold circuit.

Saturated hold colours for fills; a paired --on-* text colour that passes WCAG AA (≥ 4.5 : 1) on each; deeper --*-text colours for coloured text on paper. Raspberry, violet and cobalt were deepened in v2 so light text passes on them, and black (basalt) holds were added for project grades.

Grade circuit

Grades map to hold colours like a gym's circuit board (shared by the UI badge and the card art via AIAArt.circuit(grade)).

Card-art print inks

Illustrations print in pastel sandstone: each hold colour becomes a lit face (hold + 50% chalk) over a shade body; the climber is warm umber, never black.

03 · Typography

Chunky display, honest body.

Bricolage Grotesque for names and numbers, Hanken Grotesk for reading, Geist Mono for meta (set codes, labels). Every step is fluid with a rem floor, so browser zoom and user font settings always win; nothing in the UI goes below 12px, and card text never below 11px.

04 · Surfaces

Wall, paper, tape.

.wallBouldering · sand-in-paint ply
.wall--slateTop-rope tower
.wall--umberLead wall
.wall--nightHeaders, ink slabs
.paperCard stock panels

Hold shapes

jug
crimp
sloper
pinch
pocket
chip
V8
label hold

Tape

LimeMarigoldCoralTeal CobaltRaspberryVioletBasaltWood

05 · Components

Grippy controls.

Buttons .btn

44px minimum target · hold-shaped radius · overlay grit

Chips & dice .aia-chip · .aia-die-chip

OverhangPassiveLead access 40 XP to spendClearing next

Meters & time .aia-meter · .aia-pips

Requirement block .aia-reqs

Met / short is shown by ✓ / ✕ mark, outline and hatch — not colour alone

06 · Cards

The printed card.

Anatomy

  1. Frame — 3.2% border in the card type's colour (area for routes, category for gear, basalt for climbers, wood for training, foil gradient for milestone projects).
  2. Kind line — icon + type in mono; a status badge on the right (Attempted, Owned, Sent).
  3. Name — display face, two lines max, balanced wrap.
  4. Art window — 4 : 3 illustration with the grade hold (or price / bonus) top-right and route-type chips bottom-left.
  5. Requirements — four stat wells; in play they show ✓ met or ✕ short against your stats.
  6. Dice — buff (−, lime) and nerf (+, raspberry) dice chips, or "No dice — pure skill".
  7. Costs — time, endurance, and XP on a send / on a fall.
  8. Footer — set code (AIA · BLD 09/26) and moves or edition.
  9. Action — one real button stretched over the card, labelled by a tab hanging from the bottom edge; when unavailable, the reason sits on the art.

The card is a size container: the face's type is clamp(0.75rem, 5.6cqi, 1.4rem), so a card scales like a physical card. If text would get too small, the card grows taller instead.

One of each

07 · Card art

Pastel sandstone print.

Flat printed planes, two-tone holds, an anatomically proportioned climber with a cast shadow, grit specks and chalk dust where hands have been. Route art is generated from the route's own data, so the picture always matches the rules:

Gear, climbers and training stations each have a hand-built still life or portrait in the same inks. See all 98 on the deck page; earlier explorations are in art-styles.html.

08 · Accessibility

Everyone tops out.

AreaWhat the system doesWCAG
ContrastEvery text/background pair is a named token pair (≥ 4.5 : 1). Coloured text uses --*-text; text on holds uses --on-*. prefers-contrast: more darkens secondary ink and removes grit.1.4.3, 1.4.11
Not colour aloneGrades are always written; met/short requirements carry ✓/✕ and a hatch; disabled cards state their reason in text.1.4.1
KeyboardEvery card is one real <button>; radio groups for player count and card size; skip link; visible cobalt + chalk focus ring on every surface.2.1.1, 2.4.1, 2.4.7
DialogsClimb results, level-ups, stat shifts and victory are role="dialog" aria-modal: focus moves in, Tab is trapped, Escape closes, the page behind is inert, focus returns afterwards.2.4.3, 4.1.2
AnnouncementsTurn status is a polite live region; the game log is role="log"; meters expose role="meter" with values.4.1.3
Resize & reflowFluid type with rem floors; card size control (S–XL); single-column at 320px with no page-level horizontal scroll (card rows scroll inside themselves on phones).1.4.4, 1.4.10
TargetsButtons ≥ 44px; whole cards are the target.2.5.5, 2.5.8
Motionprefers-reduced-motion removes transforms, hover lifts and effects animations.2.3.3
Forced coloursTextures drop out; cards, chips and meters get system-colour borders.1.4.11
ImagesIllustrations are decorative (aria-hidden) because every rule they depict is also text on the card.1.1.1

09 · In code

Reusable pieces.

<script src="design/icons.js"></script>
<script src="design/card-art.js"></script>
<script src="design/cards.js"></script>

AIAArt.mount();                          // once: shared SVG defs
const card = AIACards.route(route, {
  area: 'bouldering',
  stats: playerStats,                    // shows ✓ / ✕ per requirement
  status: 'Attempted',
  action: {
    label: 'Climb',
    disabled: !!reason, reason,          // e.g. "Needs 46 END · you have 30"
    onClick: () => attemptClimb(route, 'bouldering'),
  },
});
wallEl.appendChild(card);